OTINUS PRO: HYDRAULIC PRESS BRAKE 44 T x 50"

The OTINUS PRO Hydraulic Press Brake 44 T x 50" (Model: PBO-1204-PRO) offers robust performance, ideal for precise sheet metal bending operations. It is equipped with the DELEM DA-66T controller, which manages up to 8 axes for enhanced bending efficiency. The controller’s 17" TFT touch screen supports 2D/3D programming, allowing for comprehensive program management, including storage for up to 500 programs (each comprising 25 steps and 99 repetitions). This advanced system integrates crowning control and offers USB connectivity as well as space for a bending angle sensor. This press brake can exert 44 tons of force and has a motor output of 4.0 kW. It features a 21-gallon oil tank and operates with an approach speed of 160 mm/s, a working speed of 10 mm/s, and a return speed of 130 mm/s. Structurally, it supports a maximum working length of 50 inches and has an inside frame width of 42 inches. The side frames are 4 feet apart, with a total width of 58 inches, offering ample space for various tasks. The throat gap is designed at 16 inches to accommodate larger pieces. Built for operational precision, the equipment weighs approximately 7,276 pounds and has a daylight opening of 18 inches with an 8-inch stroke. The table width of 2 inches and bed height of 31 inches promote stability and ease of use, making it an excellent choice for demanding industrial environments.